Loading...
What Is Solvent Cement And Why Is It Used For Cpvc Piping System (3) (1)

Any person dealing with CPVC piping systems must realize that CPVC solvent cement is the secret to forming strong, leak-free joints. This book fully discusses the benefits that come with using CPVC solvent cement, how it should be used, and the kind of sizes available for your choice in many of the projects you do.


CPVC pipes and fittings seal together using a unique adhesive known as CPVC solvent cement. The two are bonded through the softening of the surfaces of these pipes and fittings. This enables the surface to melt together when the solvent dries up, hence forming a very strong and permanent bond. This type of cement is relied upon for the integrity and reliability of CPVC piping systems, which are employed in the distribution of both hot and cold water supplies.

Benefits of Using CPVC Solvent Cement

High-Strength and Long-Lasting Joints

The primary advantage one can get in using UPVC solvent cement is to create joints that withstand thermal variations and high pressure.

Chemical Resistance 

PVC solvent cement has high resistance to various chemicals, making it ideal for any kind of industrial process where the pipes are subjected to contact with abrasive materials.

Method of Application

Due to a very simple process and not requiring any special equipment, the CPVC solvent cement can be applied by professionals and do-it-yourselfers alike.

Leak-proof Connections

Leak-proof connections are demanded while maintaining the efficiency of a system. Water damage can be avoided by providing leak-proof connections using CPVC solvent cement.

Versatility

With the strength properties and ease of use, CPVC Solvent Cement is usable on most industrial pipe systems and residential plumbing.

Cost-Effective

The long-term savings achieved by using UPVC solvent cement entail keeping maintenance costs low and lengthening the life of the pipe systems.

Application Procedure of the Solvent Cement

The application of CPVC solvent cement involves several important steps to ensure a strong and tight joint : 

  • Preparation: The surfaces of the pipes and fittings should be clean and free from any moisture, oil, or dirt. 

  • Application: If necessary, prime both surfaces. Apply an even coat of solvent cement. 

  • Assembly: Insert the pipe and fitting quickly and turn it slightly to ensure that the cement spreads evenly.

  • Curing: Allow the joint to cure, following the manufacturer's instructions, before testing or using the system.

The Different Types of Solvent Cement:

As mentioned earlier, CPVC solvent cements are typically made of resin mixed with proprietary solutions of solvents, stabilizers, and fillers. The viscosity of the solvent cements can also be differentiated. The amount of viscosity depends on the amount of resin content in the solvent cement. 


As much as possible, the more the amount of resin used, the more the viscosity. Besides, the more the viscosity, the better it can fill up gaps in the joints it is bonding to. Based on what has been provided above, the viscosity of the solvent cement can be broadly categorized into the following three groups :


1 Ordinary build

2. Stout body

3. Full build Refer to ASTM Specification for Solvent Cements for Chlorinated Polyvinyl Chloride (CPVC) Plastic Pipe and Fittings, F493, for the proper class of solvent cement used for a particular pipe system.

How to have a successful bonding of CPVC Piping System?

  • Check that the temperature and humidity of the surrounding air are within recommended ranges.

  • Avoid high temperatures or direct sunlight, as this can accelerate the drying process of the cement.

  • Make sure all surfaces are dry before applying the cement.

  • Apply cement with a clean brush or applicator. Do not pick up dirt or dust on the cement.

  • Avoid using too much cement; this may weaken the bond due to run/drip.

  • To ensure a strong bond, hold parts firmly together for at least 30 seconds after joining.

  • Allow a minimum of twenty-four hours to elapse for the cement to dry before subjecting the pipes or fittings to any pressure.

Conclusion

Proper selection of the right plumbing system is critical to ensure life, safety, and effectiveness. Well, with the plethora of associated advantages, CPVC plumbing systems happen to be the right choice for residential or commercial purposes. With a variety of CPVC pipes and fittings manufactured in India in varying sizes and standards, Starmax pipes provide reliable mishmashes that are tailored to your needs. Upgrade your plumbing system using CPVC products from Starmax Pipes, and enjoy associated benefits like affordability, ease of installation, and durability. You can install the right CPVC plumbing system and be guaranteed a safe and efficient water supply over many years.

Related Blog
Starmax (10) (1)

Major Differences Between PVC Solvent Cement and PVC Glue

Continue Reading
Starmax (8) (1)

Guide to Choosing the Best Solvent Cement for Your Project

Continue Reading
Starmax (2)

Ultimate Guide to Solvent Cement & Its Role in CPVC Piping Applications

Continue Reading
Starmax (1)

UPVC vs CPVC Pipes: Key Differences, Uses, and Benefits

Continue Reading
PVC Solvent Cement (1)

Pvc Solvent Cement Benefits

Continue Reading

WHY STARMAX ?

MAKE IN INDIA- BEST QUALITY PRODUCTS UNDER THE MISSION MAKE IN INDIA

BEST QUALITY PRODUCTS- All products are certified and manufactured as per ASTM standards.

HIGHEST SATISFACTION We assure the customers for 100% statisfaction in terms of price and quality

BEST BUSINESS STANDARDS- we have the mission of providings the products in best business standards i.e.

Free! Get A Quote